Bambu Lab X2D - Technical Specifications
Printing Technology
Fused Deposition Modeling
Body
| Build Volume (W*D*H) | Main Nozzle Printing: 256mm*256mm*260mm Auxiliary Nozzle Printing: 235.5mm*256mm*256mm Dual Nozzle Printing: 235.5mm*256mm*256mm Total Volume for Two Nozzles: 256mm*256mm*260mm |
| Chassis | Plastic and Steel |
| Outer Frame | Plastic, Glass, and Metal |
Dimensions and Weight
| Physical Dimensions | 392mm*406mm*478mm |
| Net Weight | 16.25 kg |
Toolhead
| Main Extruder Gear | Hardened Steel |
| Main Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor |
| Auxiliary Extruder Gear | Hardened Steel |
| Auxiliary Extruder Motor | Stepper Motor |
| Nozzle | Hardened Steel |
| Max Nozzle Temperature | 300 °C |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built-in |
| Filament Diameter | 1.75 mm |
Heatbed
| Supported Build Plate Type | Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate |
| Max Heatbed Temperature | 120 °C |
Speed
| Max Speed of Toolhead | 1000 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² |
| Max Flow for Hotend (Standard Flow Hotend) | 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) |
| Max Flow for Hotend (Optional High Flow Hotend) | 65 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) |
Chamber Temperature Control
| Active Chamber Heating | Supported |
| Max Temperature | 65 °C |
Air Purification
| Pre-filter Grade | G3 |
| HEPA Filter Grade | H12 |
| Activated Carbon Filter Type | Granulated Coconut Shell |
| VOC Filtration | Supported |
| Particulate Matter Filtration | Supported |
Cooling
| Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control |
| Main Control Board Fan | Closed Loop Control |
| Chamber Exhaust Fan | Closed Loop Control |
| Chamber Heat Circulation Fan | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
Filament Supported
| Main Hotend | PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET |
| Auxiliary Hotend | PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET |
| Auxiliary Hotend (print with caution¹) | PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA/PET |
Sensor
| Live View Camera | Built-in; 1920*1080 |
| Toolhead Camera | Built-in; 1600*1200 |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported with AMS |
| Power Loss Recovery | Supported |
Electrical Requirements²
| Voltage | High-voltage version: 200-240 VAC, 50/60 Hz Low-voltage version: 100-120 VAC , 50/60 Hz |
| Max Power³ | High-voltage version: 1600 W@220 V Low-voltage version: 1100 W@110 V |
| Steady-State Power | High-voltage version: PLA (25 °C): 250 W@220 V PC (25 °C): 550 W@220 V Low-voltage version: PLA (25 °C): 250 W@110 V PC (25 °C): 550 W@110 V |
Environment Requirements
| Working Temperature | 10 °C-30 °C |
Electronics
| Touchscreen | 5-inch 1280*720 Touchscreen |
| Storage | Built-in 8 GB EMMC and USB Port |
| Control Interface | Touchscreen, mobile App, PC App |
| Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 |
| Application Processor | Quad-core ARM with dedicated NPU |
Software
| Slicer | Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. |
| Supported Operating System | MacOS, Windows, Linux |
Network Control
| Ethernet | Not Available |
| Wireless Network | Dual-Band Wi-Fi |
| Network Kill Switch | Not Available |
| Removable Network Module | Not Available |
| 802.1X Network Access Control | Not Available |
Wi-Fi
| Operating Frequency | 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n |
