Build Volume (W*D*H)
Single Nozzle Printing: 325*320*325 mm³
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 350*320*325 mm³
Chassis & Shell: Aluminum, Steel, Plastic and Glass
Laser Safety Windows: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Air Assist Pump: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Physical Dimensions
Physical Dimensions: 492*514*626 mm³
Net Weight: 31 kg
Toolhead: Hotend
All Metal: Extruder Gear
Hardened Steel: Nozzle
Hardened Steel: Max Nozzle Temperature 350 °C
Included Nozzle Diameter: 0.4 mm
Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Diameter: 1.75 mm
Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Supported Build Plate Type: Textured PEI Plate, Smooth PEI Plate
Max Heatbed Temperature: 120 ℃
Speed
Max Speed of Toolhead
1000 mm/s
Max Acceleration of Toolhead: 20,000 mm/s²
Max Flow for Hotend (Standard Flow Hotend): 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Max Flow for Hotend (Optional High Flow Hotend)
65 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control: Active Chamber Heating
Supported
Max Temperature: 65 °C
Air Purification: Pre-filter Grade G3
HEPA Filter Grade H12
Activated Carbon Filter Type: Granulated Coconut Shell
Cooling: Part Cooling Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Chamber Heat Circulation Fan: Closed Loop Control
Cooling Fan for Hotend: Closed Loop Control
Main Control Board Fan: Closed Loop Control
Chamber Exhaust Fan: Closed Loop Control
Supported Filament Type: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS, PPS-CF/GF
Supported
Sensor
Live View Camera
Built-in; 1920*1080
Nozzle Camera
Built-in; 1920*1080
BirdsEye Camera
Built-in; 3264*2448 （Equipped with Laser Edition)
Toolhead Camera: Built-in; 1920*1080
Door Sensor: Supported
Filament Run Out Sensor: Supported
Filament Tangle Sensor: Supported
Filament Odometry: Supported with AMS
Power Loss Recovery: Supported
Electrical Requirements
Voltage :100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 2200 W@220 V / 1320 W@110 V
10 °C–30 °C
Electronics: Touchscreen
5-inch 720*1280 Touchscreen
Storage: Built-in 8 GB EMMC and USB Port
Control Interface: Touchscreen, mobile App, PC App
Neural Processing Unit: 2 TOPS
Software: Slicer & Software
Bambu Studio, Bambu Suite, Bambu Handy
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System: MacOS, Windows
Wi-Fi: Operating Frequency
2412-2472 MHz, 5150-5850 MHz (FCC/CE)
2400-2483.5 MHz, 5150-5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP): 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol: IEEE 802.11 a/b/g/n
10W & 40W Laser Module
Laser Type: Semiconductor Laser
Laser Wavelength: Engraving Laser: 455 nm ± 5 nm Blue Light
Height Measuring Laser: 850 nm ± 5 nm Infrared Light
Laser Power: 10 W ± 1 W; 40 W ± 2 W
Laser Spot Dimension: 10W: 0.03 mm * 0.14 mm; 40W: 0.14 mm * 0.2 mm
Working Temperature: 0 °C–35 °C
Max Engraving Speed: 10W: 400 mm/s; 40W: 1000 mm/s
Max Cutting Thickness: 10W: 5 mm; 40W: 15mm (Basswood Plywood)
Laser Safety Class for Laser Module: Class 4
Overall Laser Safety Class*: Class 1
Engraving Area: 10W: 310 mm * 270 mm; 40W: 310 mm * 250 mm
XY Positioning Accuracy: < 0.3 mm
Z Height Measuring Method: Micro Lidar
Z Height Measuring Accuracy: ± 0.1 mm
Flame Detection: Supported
Temperature Detection: Supported
Door Sensor: Supported
Laser Module Installation Detection: Supported
Safety Key: Included
Ventilation Pipe Adapter Outer Diameter: 100 mm
Supported Material Type: Wood, rubber, metal sheet, leather, dark acrylic, stone, and more
Cutting Module: Cutting Area 300*285 mm²
Drawing Area 300*255 mm²
Supported Pen Diameter 10.5 mm-12.5 mm
Cutting Mat Type: LightGrip and StrongGrip Cutting Mats
Blade Type: 45°*0.35 mm
Blade Pressure Range: 50 gf-600 gf
Max Cutting Thickness: 0.5 mm
Blade and Pen Recognition: Supported
Cutting Mat Type Detection: Supported
Supported Image Type: Bitmap and Vector Images
Supported Material Type: Paper, vinyl, leather, and more

Build Volume (W*D*H)
Single Nozzle Printing: 325*320*325 mm³
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 350*320*325 mm³
Chassis & Shell: Aluminum, Steel, Plastic and Glass
Laser Safety Windows: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Air Assist Pump: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Physical Dimensions
Physical Dimensions: 492*514*626 mm³
Net Weight: 31 kg
Toolhead: Hotend
All Metal: Extruder Gear
Hardened Steel: Nozzle
Hardened Steel: Max Nozzle Temperature 350 °C
Included Nozzle Diameter: 0.4 mm
Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Diameter: 1.75 mm
Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Supported Build Plate Type: Textured PEI Plate, Smooth PEI Plate
Max Heatbed Temperature: 120 ℃
Speed
Max Speed of Toolhead
1000 mm/s
Max Acceleration of Toolhead: 20,000 mm/s²
Max Flow for Hotend (Standard Flow Hotend): 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Max Flow for Hotend (Optional High Flow Hotend)
65 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control: Active Chamber Heating
Supported
Max Temperature: 65 °C
Air Purification: Pre-filter Grade G3
HEPA Filter Grade H12
Activated Carbon Filter Type: Granulated Coconut Shell
Cooling: Part Cooling Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Chamber Heat Circulation Fan: Closed Loop Control
Cooling Fan for Hotend: Closed Loop Control
Main Control Board Fan: Closed Loop Control
Chamber Exhaust Fan: Closed Loop Control
Supported Filament Type: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS, PPS-CF/GF
Supported
Sensor
Live View Camera
Built-in; 1920*1080
Nozzle Camera
Built-in; 1920*1080
BirdsEye Camera
Built-in; 3264*2448 （Equipped with Laser Edition)
Toolhead Camera: Built-in; 1920*1080
Door Sensor: Supported
Filament Run Out Sensor: Supported
Filament Tangle Sensor: Supported
Filament Odometry: Supported with AMS
Power Loss Recovery: Supported
Electrical Requirements
Voltage :100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 2200 W@220 V / 1320 W@110 V
10 °C–30 °C
Electronics: Touchscreen
5-inch 720*1280 Touchscreen
Storage: Built-in 8 GB EMMC and USB Port
Control Interface: Touchscreen, mobile App, PC App
Neural Processing Unit: 2 TOPS
Software: Slicer & Software
Bambu Studio, Bambu Suite, Bambu Handy
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System: MacOS, Windows
Wi-Fi: Operating Frequency
2412-2472 MHz, 5150-5850 MHz (FCC/CE)
2400-2483.5 MHz, 5150-5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP): 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol: IEEE 802.11 a/b/g/n
10W & 40W Laser Module
Laser Type: Semiconductor Laser
Laser Wavelength: Engraving Laser: 455 nm ± 5 nm Blue Light
Height Measuring Laser: 850 nm ± 5 nm Infrared Light
Laser Power: 10 W ± 1 W; 40 W ± 2 W
Laser Spot Dimension: 10W: 0.03 mm * 0.14 mm; 40W: 0.14 mm * 0.2 mm
Working Temperature: 0 °C–35 °C
Max Engraving Speed: 10W: 400 mm/s; 40W: 1000 mm/s
Max Cutting Thickness: 10W: 5 mm; 40W: 15mm (Basswood Plywood)
Laser Safety Class for Laser Module: Class 4
Overall Laser Safety Class*: Class 1
Engraving Area: 10W: 310 mm * 270 mm; 40W: 310 mm * 250 mm
XY Positioning Accuracy: < 0.3 mm
Z Height Measuring Method: Micro Lidar
Z Height Measuring Accuracy: ± 0.1 mm
Flame Detection: Supported
Temperature Detection: Supported
Door Sensor: Supported
Laser Module Installation Detection: Supported
Safety Key: Included
Ventilation Pipe Adapter Outer Diameter: 100 mm
Supported Material Type: Wood, rubber, metal sheet, leather, dark acrylic, stone, and more
Cutting Module: Cutting Area 300*285 mm²
Drawing Area 300*255 mm²
Supported Pen Diameter 10.5 mm-12.5 mm
Cutting Mat Type: LightGrip and StrongGrip Cutting Mats
Blade Type: 45°*0.35 mm
Blade Pressure Range: 50 gf-600 gf
Max Cutting Thickness: 0.5 mm
Blade and Pen Recognition: Supported
Cutting Mat Type Detection: Supported
Supported Image Type: Bitmap and Vector Images
Supported Material Type: Paper, vinyl, leather, and more

Product Features
Multi Color & Multi Material Capability
Proven reliability trusted by professionals
High quality printing with 7 μm Lidar Resolution
High speed CoreXY with 20000 mm/s² Acceleration
Dual Auto Bed Leveling
Build Volume (W×D×H) 256 × 256 × 256 mm³*
Nozzle 0.4 mm Hardened Steel Included
Hotend All-Metal
Max Hot End Temperature 300 ℃
Filament Diameter 1.75 mm
Supported Filament
PLA, PETG, TPU, ABS, ASA, PVA, PET
Ideal for PA, PC, Carbon/ Glass Fiber Reinforced Polymer
Build Plate Surface Bambu Textured PEI Plate or Bambu Cool Plate (Pre-installed, Random, Both compatible with Micro Lidar)
Max Build Plate Temperature 110℃@220V, 120℃@110V
Max Speed of Tool Head 500 mm/s
Max Acceleration of Tool Head 20 m/s²
What to Expect from the X1C Combo 3D Printer
Core XY with 20000 mm/s² acceleration
Up to 16 multi-color printing
Dual auto bed leveling
7μm lidar resolution
Spaghetti failure detection
AI inspected first layer
Colors & Beyond
With Bambu Lab Automatic Material System (AMS)，you can now enjoy printing freely in multiple colors and materials.
Vibration Compensation & Extrusion Compensation
The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints.
Dual Auto Bed Leveling
Dual Auto Bed Leveling system checks for increased reliability.The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling.
Al inspected first layer
Tired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing...anything else..
Spaghetti detection
Our Al keeps an eye out for Spaghetti monsters, so you can sleep easy in the knowledge that your printer is safe from this scourge.

Supports Multi-Color Printing with Up to 16 Colors Using 4 CFS
Direct Drive Extruder​
Tilt Detection
FOC Closed-Loop Motors
350*350*350mm Build Volume
Active Chamber Heater
4*500g filaments in the box
600mm/s max speed
30000mm/s² max acceleration
nozzle temperature up to 350℃
heated temperature up to 120℃
chamber temperature up to 60℃

Build Volume(WxDxH): 256 x 256 x 256 mm³*
Shell: Enclosed (Plastic & Glass)
Hot End: All-Metal
Nozzle: 0.4 mm Stainless Steel Included
Max Hot End Temperature: 300 ℃
Nozzle Diameter : 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm (Optional)
Build Plate Surface Compatibility: Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate
Max Build Plate Temperature: 100℃
Max Speed of Tool Head: 500 mm/s
Max Acceleration of Tool Head: 20 m/s²
Control Board Fan: Closed Loop Control
Chamber Temperature Regulator Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Air Filter: Activated Carbon Filter
Supported Filament: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA
Capable: PA, PC
Chamber Monitoring Camera: Low Rate Camera 1280 x 720/0.5fps
Timelapse Supported
Filament Run Out Sensor: Yes
Physical Dimensions: P1S：389 * 389 * 458 mm³,
P1S Combo Package size 485 × 480 × 585 mm³,
Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V

Food Printing Machine Edible Ink CISS

Ink type: Edible Ink

Type: Inkjet Printer

Printing size: 200mm*200mm

Plate type: Flatbed Printer

Brand name: ZM food printer

Usage: food printer

Automatic grade: Automatic

Color & page: Multicolor

Voltage: 110V/220V

Dimensions(l*w*h): 46cm*43cm*52cm

Weight: 30 KG

Single package size: 59X50X52 cm

Single gross weight: 35.000 kg

Build Dimensions 256 x 256 x 256 mm³
Materials PLA, PETG, TPU, ABS , ASA , PVA, PET, PA and PC
Connectivity Wi-Fi, Bambu-Bus
Technology Fused Filament Fabrication (FFF)
Dimensions 389 x 389 x 458 mm³ (Printer)
Weight (KG) 12.95

CoreXY up to 20000 mm/s² Acceleration
The P1 series inherits the proven kinematics and motion control system of the Bambu Lab Flagship printer. It prints with a top speed of 500 mm/s, the acceleration from zero to 500 mm/s takes just 0.025 seconds.
Vibration Compensation & Pressure Advance
The active vibration compensation (XY) algorithm and pressure advance guarantees extra smoothness and gets you good prints.

Direct-drive Extruder
With the design that the motor is directly connected to the extruder, P1 series has better control on the extrusion and retraction of flexible filaments. Precise and consistent extrusion for smooth and no-blur prints.

· Capture Every Tiny DetaiI
· Advanced Blue Light 3D Scanning
· Single-frame Precison: Up to 0.02 mm
· Fast 16 fps Scanning Speeds
· Wi-Fi 6 and USB Type-C ConnectIvity

Capture the tiniest detail with the Revopoint MINI 2 3D scanner, the latest addition to the MINI series. Its powerful blue light metrological precision, upgraded hardware, and versatile accessories are ready to streamline 3D modeling for industrial inspection, customized healthcare, jewelry design, game modeling, and digitizing historical relics.

Product Features

Full-auto Calibration
Multi-Color Printing (Combo Version)
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume
Product Features
Goodbye to Tedious Manual Calibration And Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
No More "Paper Method"
A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.
Auto Tune Both X & Y Resonance Before Every Print

A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Fully Automated PA (Pressure Advanced) Calibration
First of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 handles Pressure Advanced calibration automatically.
Auto Monitoring And Adjusting The Belts
A1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.
Load/Unload Filament With One Touch

No manual setting involved, A1 fully automated the filament load/unload process.

Product Features
● Print Fast, Seamlessly, Max 600mm/s
● Expansive Printing, 250x250x260mm
● Auto Leveling, Auto Z-Offset

Build volume
250*250*260mm (W*D*H)
Printing speed
600mm/s(Max.)
Machine leveling
Automatic Leveling, vibration suppression, flow control, automatic hot bed leveling, Z-axis free compensation
Cooling fan rpm
Motherboard fan, model cooling fans, hot end fans
Nozzle
≤300℃
Extruder
Single, hardened steel extruder gear
Build platform
PEI spring steel
Hotbed temperature
≤110℃
Operating screen
4.3-inch touch screen
Slicing software
AnycubicSlicer/AnycubicSlicer for Orca
Material
Kobra 3 only support PLA, PETG and TPU. ACE PRO only support PLA, PETG, ABS, ASA, PET, PA, PC, PP, HIPS.
Power supply
400W
Connection method
USB flash drive, Wi-Fi, AC Cloud
Machine dimensions
Kobra 3 452.9*504.7*483mm(W*D*H)
Machine weight
Kobra 3 9.2kg

Product parameters
Build volume: 500 x 500 x 500 mm
Frame dimensions: 690 x 800 x 715 mm

Print head: Single nozzle
Nozzle size: 0.4 mm
Max. hot end temperature: 260 ℃
Max. heated bed temperature: 60 ℃
Print bed material: Borosilicate Glass Build Plate
Frame: Aluminum
Bed leveling: CR Touch Leveling
Connectivity: SD card, USB
Print recovery: Yes
Filament sensor: Yes
Camera: No
Filament diameter: 1.75 mm
Third-party filament: Yes
Filament materials: PLA Consumer materials (ABS/PETG will require a higher hotbed temperature and in a sable condition. For the CR-10S5, as for the large build volumn, the heat dissipation rate of the hot bed will also be correspondingly faster. We will recommend the PLA for a easily printing.)

Recommended slicer: Cura, Simplify3D, Repetier-Host
Operating system: Windows, Mac OSX, Linux
File types: STL, OBJ, AMF
DIMENSIONS AND WEIGHT

Print Volume: 420 x 420 x 480 mm³
Max Printing Speed: 500 mm/s
121 (11 x 11) Points Auto Bed Leveling
Up To 300 °C High-Temp Nozzle
Support PLA/TPU/PETG/ABS/ASA/Nylon Filaments
WIFI/WLAN/USB Transfer

Specification
Printing Technology: FDM (Fused Deposition Modeling)
Frame Material: CNC machined aluminium extrusion
File Transfer Method: WIFI, USB, WLAN
File Format: STL, OBJ
UI Language: English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Printing Platform Size (PEI Area): 430 x 430 mm²
Machine Size: 658 x 632 x 740 mm³
Package Size: 790 x 690 x 290 mm³
Max. Nozzle Temperature: 300 °C
Max. Hot bed Temperature: 85 °C (ambient temperature 25 °C)
Filament Compatibility: PLA / TPU / PETG / ABS / ASA / Nylon
Net Weight: 18.1 kg
Gross Weight: 26.35 kg
Resume Printing: Yes
Filament Detection: Yes
Max Speed of Tool Head: 500 mm/s
Max Acceleration of Tool Head

Build volume: 6.5L
Printing volume: 223*126*230mm
Printing speed: Max Speed 130mm/hr, 0.1mm Layer With Standand Resin; Max Speed170mm/hr, 0.1mm Layer With High Speed Resin; Max Speed190mm/h, 0.15mm Layer With High-Speed Resin; Max Speed 220mm/h, 0.2mm Layer With High-Speed Resin
Machine leveling: Leveling-free
Z axis: Type T (Transport Ball Screw)
Lcd screen size: 10.1", 14K (13320 * 5120)
Light source: LighTurbo 3.0 (COB+Fresnel Lens)
Build platform: Laser-carved Plate
Operating screen: 4.3" IPS Touch-control
Slicing software: Anycubic Slicing, CHITU,Tango (CHITU and Tango can be supported around the end of May)
Material: Compatible with kinds of resin (high speed, water-washable, standard, ABS-like, plant-based, etc.)
Machine dimensions: 312*315*520mm
Machine weight: 12.8KG

Features and Innovations
1. Industry-Leading 16K Monochrome LCD Screen
The heart of the Elegoo Saturn 4 Ultra is its 16K monochrome LCD screen, delivering a breathtaking resolution of 11520x5120 pixels. This unparalleled level of detail allows users to create models with an XY precision of 19x24μm, making it ideal for intricate designs, highly detailed prototypes, and professional applications.

Durability and Protection: The LCD screen is protected by 9H tempered glass, which prevents scratches and ensures longevity. The screen’s durability adds value for frequent users, minimizing maintenance costs and downtime.
2. Generous Build Volume
With a build volume of 211.68 x 118.37 x 220mm, the Saturn 4 Ultra provides ample space for a wide range of projects. Whether you’re crafting a single large model or multiple smaller ones in a batch, the expansive build volume meets the needs of professional and creative endeavors.

3. Game-Changing Tilt Release Technology
Elegoo’s patented Tilt Release Technology redefines resin printing speed by minimizing the resistance during layer peeling. This results in faster print times without sacrificing quality or requiring specialized resins.

Speed and Efficiency: Achieve print speeds of up to 150mm/h, significantly reducing production times. This makes the Saturn 4 Ultra an excellent choice for time-sensitive projects.
4. Real-Time AI Monitoring with HD Camera
The integrated AI HD Camera (1920x1080 resolution) ensures that you can monitor the entire printing process in real time. This intelligent system not only provides instant feedback but also captures time-lapse videos of your prints, making it easier to analyze and showcase your work.

5. Enhanced Printing Success with a Heating Tank
Cold environments can adversely affect resin properties, leading to failed prints. The Saturn 4 Ultra addresses this issue with its built-in heating tank, which maintains an optimal resin temperature of 25°C in just 26 minutes under standard conditions.

Automatic Temperature Control: Sensors measure and display the real-time temperature of the resin, ensuring consistent results.
Compatibility: Supports a variety of mainstream and specialized resins, giving users the flexibility to choose materials that suit their specific needs.
6. Fully Automatic Leveling System
Gone are the days of tedious manual leveling. The Saturn 4 Ultra features an automatic leveling system, ensuring that the build plate is perfectly aligned with the LCD screen. This not only simplifies the setup process but also enhances print reliability.

7. Advanced Connectivity for Modern Workflows
The printer is equipped with Wi-Fi connectivity, allowing for file transfers at speeds of 6-10Mbps. This eliminates the need for USB drives and enables seamless integration into cluster printing setups, making it perfect for professional environments.

Designed for Excellence: Usability and Reliability
Smart Mechanical Sensors
The Saturn 4 Ultra incorporates intelligent sensors to ensure smooth operation:

Resin Shortage Alarm: Alerts you if the resin level is below the minimum requirement, preventing print failures.
Residue Detection Alarm: Protects the LCD screen by detecting leftover material on the build plate.
Z-Axis Troubleshooting: Automatically stops operations if leveling or residue issues are detected.
User-Friendly Features
Elegoo has designed the Saturn 4 Ultra with user convenience in mind:

Dual Pour Spouts: Simplify resin handling with dual pour spouts for quick and mess-free resin pouring.
Flip-Up Cover: Provides easy access to the build area without taking up extra space.
Replaceable Vat: A quick-release mechanism allows for easy maintenance and resin changes.
Versatile Applications
From dental models to jewelry design, the Saturn 4 Ultra excels in a variety of fields. Its precision and reliability make it an invaluable tool for industries such as education, prototyping, and collectibles creation.

Technical Specifications: Elegoo Saturn 4 Ultra 16K
Feature Details
Build Volume 211.68 x 118.37 x 220mm
Resolution 11520x5120 (19x24μm)
Printing Speed Up to 150mm/h
Layer Thickness 0.01-0.2mm
Light Source COB & FCLS (405nm)
Control Panel 4-inch capacitive touch screen
Connectivity USB, Wi-Fi
Weight Net: 16.1kg / Gross: 18.7kg
Dimensions 327.4 x 329.2 x 548mm
Slicing Software CHITUBOX

The Aufero AL3 Laser Engraver Machine with a 20W output is a high-performance diode laser engraver designed for DIY projects, small businesses, and creators. It delivers accurate and powerful engraving and cutting on a wide variety of materials such as wood, metal, aluminum, glass, and leather. It is easy to assemble, safe to operate, and compatible with popular software.

Key Features
1. Powerful 20W Laser Module

Delivers up to 20000 milliwatts of laser power

Produces fine engraving details with a spot size of about 0.08 by 0.18 millimeters

Large working area of about 400 by 400 millimeters (15.7 by 15.7 inches)

2. High-Speed Performance

Engraving speeds up to 20000 millimeters per minute

Maintains consistent precision thanks to a stable mechanical structure

3. Multi-Material Support
Can engrave and cut:

Wood, leather, paper, black acrylic

Stainless steel, anodized aluminum, coated metal

Glass, stone, plastic, fabric, and more

4. Multiple Connectivity Options

Supports WiFi, USB, TF card, and app-based control

Compatible with LaserGRBL (free) and LightBurn (paid)

Works with Inspiraesth mobile app

5. Air Assist Included

Comes with a 40 to 50 liter per minute air pump

Helps reduce burn marks and improve cutting quality by blowing away smoke and debris

6. Built-In Safety Features

Safety features include:

Tilt and vibration detection

Active position protection

Eye protection shield

Over-current and voltage protection

7. Durable and Easy to Set Up

Made with aluminum alloy frame and ABS components

Simple assembly with just a few screws

Compact, stable, and ready to use within minutes

Technical Specifications
Specification Details
Laser Output 20W diode laser
Wavelength 455 nanometers
Engraving Area 400 by 400 mm
Maximum Speed 20000 mm per minute
Spot Size 0.08 by 0.18 mm
Focus Distance Around 50 mm
Compatible Formats JPG, PNG, BMP, SVG
Voltage Input 100 to 240V AC
Software Support LaserGRBL, LightBurn, Inspiraesth
Connectivity WiFi, USB, TF card
Build Materials Aluminum 6063, ABS, steel

Pros and Considerations
Pros:

High speed with excellent precision

Can engrave and cut a wide range of materials

Multiple ways to connect and control

Air assist system improves cutting quality

Strong safety measures for safe use

Things to Keep in Mind:

Eye protection is required during operation

Not suitable for cutting transparent acrylic or mirrors