Creality

Supports Multi-Color Printing with Up to 16 Colors Using 4 CFS
Direct Drive Extruder​
Tilt Detection
FOC Closed-Loop Motors
350*350*350mm Build Volume
Active Chamber Heater
4*500g filaments in the box
600mm/s max speed
30000mm/s² max acceleration
nozzle temperature up to 350℃
heated temperature up to 120℃
chamber temperature up to 60℃

Key Features
16-Color Multi-Material Printing: Print up to 16 colors with the 4-bay CFS multi-color system, no manual filament swaps and no pausing required.

Active Chamber Heating: Stable high-temperature environment designed for filaments like ABS, and PPA-CF, reducing warping.

Dual AI Cameras for Smarter Monitoring: provide real-time monitoring, and AI failure detection (spaghetti, detachment, runout alerts, and more).

Smart Auto Leveling: Automatically scans and levels the actual print area to ensure better first-layer adhesion and fewer failed prints.

Pro-Level 300 mm Volume: Create larger prototypes, cosplay props, RC parts, or batch-produce multiple models in a single print.

300 × 300 × 300 mm Build Volume

Max Printing Speed 600 mm/s

Key Features
* 16-Color Multi-Material Printing: Print up to 16 colors with the 4-bay CFS multi-color system, no manual filament swaps required.
* Quiet Enough for Home & Office: Step-servo motors and dynamically balanced fans keep Silent Mode around 45 dB, as quiet as typing on a laptop.
* Truly Out-of-the-Box (Beginner-Friendly): Fully pre-assembled and pre-tuned; guided setup takes you from unboxing to first print in about 10 minutes.
* Smart Auto-Leveling: Probes only the area where your model will be printed, speeding up leveling and improving first-layer consistency.
* Stable High-Speed Quality: The enclosed rigid frame and step-servo motion system deliver sharp details and smooth surfaces — even at up to 600 mm/s.
* Printing area 260 × 260 × 260 mm

Product parameters
Build volume: 500 x 500 x 500 mm
Frame dimensions: 690 x 800 x 715 mm

Print head: Single nozzle
Nozzle size: 0.4 mm
Max. hot end temperature: 260 ℃
Max. heated bed temperature: 60 ℃
Print bed material: Borosilicate Glass Build Plate
Frame: Aluminum
Bed leveling: CR Touch Leveling
Connectivity: SD card, USB
Print recovery: Yes
Filament sensor: Yes
Camera: No
Filament diameter: 1.75 mm
Third-party filament: Yes
Filament materials: PLA Consumer materials (ABS/PETG will require a higher hotbed temperature and in a sable condition. For the CR-10S5, as for the large build volumn, the heat dissipation rate of the hot bed will also be correspondingly faster. We will recommend the PLA for a easily printing.)

Recommended slicer: Cura, Simplify3D, Repetier-Host
Operating system: Windows, Mac OSX, Linux
File types: STL, OBJ, AMF
DIMENSIONS AND WEIGHT