Spare Parts

Overview
The hardened steel extruder gear assembly is an internal component of the hardened steel extruder unit. It comprises a driven gear and an active gear that work together to feed filament into the hotend.

Built with heavy-duty materials, the hardened steel extruder gear has a better capability of printing with tough engineering filaments like PAHT-CF and PET-CF for long-lasting performance. If abrasion or clogging occurs due to extended use, users can just replace the extruder gear assembly rather than the whole extruder unit.



*The P1 Series Extruder Unit comes with stainless steel extruder gear. Users can upgrade it to hardened steel extruder gear for better abrasion resistance to engineering filaments.



Installation
Learn more about the replacement of hardened steel extruder gear on Bambu Lab Wiki.



In the Box
- Hardened Steel Extruder Gear Assembly



Compatibility
X1 Series, P1 Series

Overview
The hardened steel extruder unit is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as carbon fiber nylon and glass fiber nylon.

In addition, the extruder unit includes a sensor that supports filament break detection, which can help prevent print failures and improve overall printing efficiency.



Installation
Learn more about the replacement of hardened steel extruder unit for X1 Series on Bambu Lab Wiki.



In the Box
- Hardened Steel Extruder Unit - X1 Series



Compatibility
X1 and X1C (not for X1E)

Bamboo Lab X1 Carbon, X1, X1C Hotend Complete Kit for X1 Series 3D Printer, Full Assembly Hardened Steel Hot End with Fan, Thermistor, Ceramic Heater, 0.4mm Nozzle, Extruder Heating Block Replacement

Features:

Bamboo Lab X1,X1C,X1 Carbon hotend complete kitFull assembly hardened steel hot end with fan, thermistor, ceramic heater, 0.4mm nozzle,heating block replacement. It is compatible with common 3D printing filaments such as PLA and PETG etc. [not suitable for X1E]
Unique Integrated NozzleThe nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle.
Fast Heating & Accurate TempThe ceramic heater can heat the nozzle up to 300C while the thermistor has highly accurate temperature measurement and reliable structural design.
Safety Cooling FanThe cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking.
Hassle - free installation

Overview
The ceramic heater and thermistor for Bambu Lab P1P 3D printer are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.

The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.

Installation
Learn more about the replacement of ceramic heater & thermistor on Bambu Lab Wiki.

In the Box
- Ceramic Heater & Thermistor * 3
- Thermal Grease * 3
- Retaining Clip * 3

Compatibility
P1 Series Exclusive

Ceramic Heater Block Kit Extruder Hot End,300°C High Temperature, Powerful 60W Heating Ring, High Flow Printing, High Thermal Conductivity for Creality K1 & K1 Max 3D Printer